ADEMCO VISTA
4110/4120

QUICK GUIDE TO ALARM SYSTEM FUNCTIONS

 

Ademco Vista 4110

*Check Zones: [Press READY key.] To view faulted zones when system not ready.

*Arm System: [Enter code, press arming key desired: (AWAY, STAY, INSTANT, MAXIMUM)] Arms system in mode selected.

*Quick Arm: [Press #, press arming key desired: (AWAY, STAY, INSTANT, MAXIMUM)] Arm system in mode selected, quickly and without use of code.

*Bypass Zone(s): [Enter code. Press BYPASS key. Enter zone number(s) to be bypassed (use 2-digit entries).] Bypassed zones are unprotected and will not cause an alarm if violated.

*Quick Bypass (if programmed): [Enter code. Press BYPASS key.] Bypasses all faulted zones automatically.

*Disarm System: [Enter code. Press OFF key.] Also silences sounders. Memory of alarm remains until cleared.

*Clear Alarm Memory: [After disarming, enter code again. Press OFF key.] Console will beep rapidly upon entry if alarm has occurred. Alarm display will remain upon disarming until cleared.

*Duress (if active and connected to central station): [Arm or disarm "normally", but with 4th digit of code increased by "1".] Performs desired action and sends silent alarm to central station.

*Panic Alarm (as programmed): [Press key {A}, {B}, or {C} for at least 2 seconds, or (if no A, B, or C on your console) press keys {1} & {*}, or {*} & {#}, or {3} & {*}, both at the same time.]

*Test Mode: [To turn ON or OFF: Enter code. Press CHIME key.] Tests alarm sounder and allows sensors to be tested.


Ademco Vista 4120

*Displaying Open Zones: [{*} Key (With system disarmed)] Open zone(s) will be displayed.

*Perimeter Protection (with entry delay): [Security Code + STAY {3}] Interior unarmed for freedom of movement inside. Entry and exit delay in effect.

*Perimeter Protection (without entry delay): [Security Code + INSTANT {7}] Interior unarmed for freedom of movement inside. Exit delay is in effect.

*Full Protection (perimeter & interior): [Security Code + AWAY {2}] Perimeter and interior protected. Exit delay is (with entry delay) in effect.

*Full Protection (perimeter & interior): [Security Code + MAX {4}] Perimeter and interior protected. Exit delay is (without entry delay) in effect.

*Disarming System (and silencing alarms): [Security Code + OFF {1}] System is disarmed and any alarms silenced.

*Bypassing Protection Zones: [Security Code + BYPASS {6} + Zone number (01, 02, etc.)] Zones bypassed will unprotected.

*Initiating Emergency Alarms: [Key A, B, C, or Key pairs * & # 1 & * or 3 & #] Press key assigned for the desired emergency alarm (silent, audible, or Fire).

*Entering Test Mode: [Security Code + TEST {5}] External sounder (if used) will sound 3 seconds. In Test mode, opening or closing any protected window, door, etc. will cause 3 tone.

*Exiting Test Mode: [Security Code + OFF {1}]


(c) Copyright 1996-2001, DSS Security, Inc.